Hi everyone.
I own a 1988 ltd edition that I haven't played for about 15 years and I'm restoring/reconditioning it.
I have a question about the electronics/pick-ups.
It is fitted with a single coil at the neck and a humbucker at the bridge, volume pot and 5-way blade selector switch.
I've got 2 things I need help with.
1. Does anyone know how the positions of the blade switch was originally configured in regards to the pick ups.
2. The active electronics board inside has a small jumper switch block numbered with 3 switches 1-3 and hat looks like a small blue block rheostat that is set with a small screwdriver. What if anything do these controls do?
Thanks in advance for any help.

Try this one..

http://www.dimarzio.com/sites/default/f ... ep1112.pdf

As for the active electronics, it is not an easy guess without knowing what specific model you have. There were a few LE's out there with quite a variance in their construction..

Hope that helps..

_________________
Chaos, panic, and disorder.. My work is done here.

Thanks for the link

I'll see how this compares to the wiring I have.

Sorry I was a bit vague about the model. If it helps this is the guitar I have.

http://www.jacksonguitarsonsale.com/Jac ... e_846.html

Thanks again.