SKU #2910113576

JS Series Dinky™ Arch Top JS32-7 DKA HT, Amaranth Fingerboard, Snow White

$533.32 MSRP
New

Seven-string fans looking for a guitar that is as sleek and deadly as it is affordable will find everything they need with the JS Series Dinky™ Arch Top JS32-7 DKA HT.

This slick axe features a 26.5” scale length for better low-end articulation, a lightweight and resonant poplar body with an arched top, bolt-on maple neck with graphite reinforcement and scarf joint for rock-solid stability. Hosting 24 jumbo frets and piranha tooth inlays, the 12”-16” compound radius amaranth fingerboard creates the ideal playing surface for fat riffs and easy chording near the black plastic nut while gradually flattening in the upper registers for lightning-quick solos and wide bends without fear of fretting out.

Powered by direct mount dual Jackson high-output humbucking pickups, the JS32-7 DKA HT is also equipped with a three-way blade switch, single volume and tone controls, compensated string-through-body fixed Jackson HT7 bridge, sealed die-cast tuners and our 3x4 (3 over, 4 under) AT-1 headstock.

Available in an elegant and pure Snow White finish, the JS32-7 DKA HT is completed with all-black hardware and stylish white neck binding.

One-Piece Bolt-On Maple Neck with Graphite Reinforcement and Scarf Joint

A type of neck constructed with a scarf joint for an angled back headstock, which in turn increases the tension behind the nut eliminating the need for string trees and/or string retainer bars. The bolt-on neck joins the neck to the body of the guitar with screws or bolts, allowing for more control, attack and sustain.

  • Neck
    Neck Construction 1-Piece Maple
    Neck Finish Satin
    Neck Binding White
    Scale Length 26.5" (673 mm)
    Fingerboard Radius 12"-16" Compound Radius (304.8 mm to 406.4 mm)
    Fingerboard Material Amaranth
    Number of Frets 24
    Fret Size Jumbo
    Nut Width 1.875" (47.6 mm)
    Position Inlays Piranha Tooth (Small Sharkfin)
    Truss Rod Nut Truss Rod Adjustment at Nut
    Headstock Jackson® 3x4 AT-1 (3 Over/4 Under)
    Neck Plate 4-Bolt (recessed screws)
12"-16" Compound Radius Fingerboard

Jackson pioneered the use of the innovative 12"-16" compound radius design, in which the fingerboard gradually flattens toward the heel from its more rounded profile at the nut. This makes for comfortable and natural-feeling chording and riffing near the nut, with optimal shred articulation and bending nearer the heel.

  • Hardware
    Bridge Jackson® HT7 String-Through-Body Hardtail
    Hardware Finish Black
    Tuning Machines Jackson® Sealed Die-Cast
    Pickguard None
    Pickup Covers Black
    Control Knobs Dome-Style
    Switch Tip Black
  • Electronics
    Bridge Pickup Jackson® High-Output 7-String Humbucking
    Neck Pickup Jackson® High-Output 7-String Humbucking
    Controls Master Volume, Master Tone
    Pickup Switching 3-Position Blade: Position 1. Bridge Pickup, Position 2. Bridge and Neck Pickups, Position 3. Neck Pickup
    Configuration HH