SKU #2803056885

USA Signature Chris Broderick Soloist™ 6, Ebony Fingerboard, Transparent Black

$3,299.99 MSRP

In collaboration with Jackson Custom Shop Master Builder Mike Shannon, modern metal master Chris Broderick designed his own special take on the venerable Soloist. The USA Signature Chris Broderick Soloist is a sophisticated riffing machine loaded with the premium features needed to keep up with the most demanding music produced today.

Those premium features include 25.5" scale, offset arch top mahogany body, premium 5/8" quilt maple top or plain maple top (Gloss Black only), through-body quartersawn maple neck, 12" flat radius ebony fingerboard with 24 jumbo stainless steel frets, binding around the body, neck and headstock, direct mount DiMarzio Chris Broderick signature pickups, Floyd Rose Lo-Pro tremolo bridge, Planet Waves™ Auto-Trim locking tuners, Ernie Ball® strap locks, push/pull volume with coil split, push/pull tone control, kill switch and matching reverse AT-1 headstock. Comes with a hardshell case.

Direct Mount DiMarzio® D Activator Chris Broderick Signature Pickups

The Broderick-designed DiMarzio® D Activator humbucking neck and bridge pickups are passive with a lot of headroom, and respond quickly and accurately to changes in pick attack. A hard pick attack doesn’t cause the signal to flatten out and picking more softly or rolling the volume control down lets the sound clean up naturally. Tonally versatile, these pickups punch well above their weight, cranking out monstrous tone that will pin your ears back, while also delivering glassy single-coil tones.

  • Neck
    Neck Material 1-Piece Quartersawn Maple Neck-Through-Body with Graphite Reinforcement and Scarf Joint
    Neck Construction Neck-Through-Body
    Neck Finish Painted
    Neck Binding Quilted Maple
    Scale Length 25.5" (648 mm)
    Fingerboard Radius 12" (305 mm)
    Fingerboard Material Ebony
    Number of Frets 24
    Fret Size Jumbo
    Nut Width 1.6875" (42.86 mm)
    Position Inlays None
    Truss Rod Nut Truss Rod Adjustment at Nut
    Headstock Jackson® Reverse AT (3-Over/3-Under)
    Neck Plate None
Push/Pull Volume on Coil Split

The push/pull control concealed inside the volume control splits the coil of the humbucking bridge pickup to add single-coil tone to your sonic toolbox.

  • Electronics
    Bridge Pickup Chris Broderick Designed Custom DiMarzio® (Direct Mounted)
    Neck Pickup Chris Broderick Designed Custom Direct-Mount DiMarzio®
    Controls Volume, Tone, Kill Switch
    Pickup Switching 3-Position Toggle: Position 1. Bridge Pickup, Position 2. Bridge and Neck Pickups, Position 3. Neck Pickup
    Configuration HH